Source for washer on driveshafts? | FerrariChat
Buy

Source for washer on driveshafts?

Discussion in '308/328' started by AN-M, Oct 26, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #1 AN-M, Oct 26, 2015
    Anybody who knows a source for the conical washer which sits on one side of the cv joints? One of mine seems to be missing. :(
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,100
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #2 Rifledriver, Oct 26, 2015
    The entire thing is made by Lobro. That part is not sold by Ferrari, I'd try some Porsche suppliers.
     
  3. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #3 AN-M, Oct 26, 2015
    Wunderbar! I'll start searching at ones! Thanks!
     
  4. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #4 AN-M, Nov 1, 2015
    I found a perfect candidate on Mcmaster, but out of reach for us poor bastards outside USA. :(
     
  5. 72Dino246GT(Eur)

    72Dino246GT(Eur) Rookie

    Dec 1, 2005
    34
    SFO Bay Area
    Full Name:
    Peter Hollyer
    #5 72Dino246GT(Eur), Nov 1, 2015
    Flat Washer Across Two Bolts 30813030 £7.95
    Driveshaft Parts for Ferrari 308, 208, 288 GTO & F40 - Superformance.uk
     
  6. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #6 AN-M, Nov 1, 2015
    Sorry, but wrong part. Its a conical washer which sits on the shaft, pressing the cv against the outside clip. Even asked them for a possible source, but no help.
     
  7. Jet Lag

    Jet Lag Karting

    Dec 6, 2003
    173
    Seattle
    Full Name:
    Robert Bangs
    #7 Jet Lag, Nov 7, 2015
    If it is the washer that applies a little pressure between the half axle and cv joint you need Porsche part # 901.332.312.00
    I got mine from Pelican

    good luck!
     
  8. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #8 AN-M, Nov 8, 2015
    That was excatly the part I needed and now its ordered! :D
    Thank you very much!
     
  9. hyenahf

    hyenahf F1 Rookie

    May 25, 2004
    2,603
    #9 hyenahf, Nov 10, 2015
    if memory serves, having both cars, the 308 halfshafts i recall are interchangeable with the 930...
     
  10. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,566
    San Carlos, CA
    Full Name:
    Mitchell Le
    #10 yelcab, Nov 10, 2015
    The same misinformation is given on the 355 CV boot. After ordering 8 Porsche 930 CV boots and they don't fit, I just bought the right ones for Ferrari.
     
  11. DavidB_SD

    DavidB_SD Karting

    Sep 7, 2008
    64
    San Diego, CA
    Full Name:
    David B
    #11 DavidB_SD, Nov 11, 2015
    In my experience it is not misinformation and the 930 CV boots do indeed fit on the 308. I ordered them from my local Porsche parts guru (I asked for 901-332-293-12 and told him it was for a 308/930). They looked like they wouldn't fit but I was told they're equally as tight on the 930. With a little stretching they fit nicely.

    I think the trick was to put the big end on first by putting your fingers through the small end and stretching the big end out so it will fit.

    -David
     
  12. Jet Lag

    Jet Lag Karting

    Dec 6, 2003
    173
    Seattle
    Full Name:
    Robert Bangs
    #12 Jet Lag, Nov 12, 2015
    Made by the same guys... and yes, they are tight! More so than they were 5 years ago. If you get the Porsche year wrong you'll get an extra flange that you can't use; just toss it. Where you can really save is with the cv joints themselves - compare what Pelican wants and what your local Ferrari dealer wants for the exact same thing/ maker. That being said, I bought my last set of boots from an independant Ferrari mechanic in New England and I think they were less than when I bought Porsche boots from Pelican.
     
  13. AN-M

    AN-M Formula Junior

    Jun 30, 2012
    367
    Norway
    Full Name:
    André
    #13 AN-M, Nov 15, 2015
    The washers arrived yesterday and was a perfect fit. Thanks again! :)
     
  14. Jet Lag

    Jet Lag Karting

    Dec 6, 2003
    173
    Seattle
    Full Name:
    Robert Bangs
    #14 Jet Lag, Nov 16, 2015
    Great! I'm happy they worked out for you. Good luck on your project!!
     

Share This Page