Sparco Milano seats in 355, mount to use? | FerrariChat
Buy

Sparco Milano seats in 355, mount to use?

Discussion in 'Technical Q&A' started by k wright, Feb 28, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. k wright

    k wright F1 Rookie

    Feb 4, 2004
    2,544
    North East TN
    Full Name:
    Kent Wright
    #1 k wright, Feb 28, 2006
    I've ordered a pair of Milano seats for my 96 355 GTS and haven't been able to find a suitable bracket for mounting. Anyone been down this road before?

    Sparco has suggested to my vendor that the bracket used for early the early 911 will work, however, after seeing photos of this bracket I doubt it.

    Thanks for your help.

    ken
     
  2. ALUMINUMYELLOW328

    ALUMINUMYELLOW328 Formula Junior

    May 30, 2004
    381
    Bergen County, NJ
    Full Name:
    Rhett R Arcilla
    #2 ALUMINUMYELLOW328, Feb 28, 2006
    Check if your existing seat brackets are removable from the current seat and then check if they can be mounted to the Milano, I say that because I removed the existing bracket from my 328 seat and reused it to mount a set of Sparco Roadster's. Good Luck.
     
  3. k wright

    k wright F1 Rookie

    Feb 4, 2004
    2,544
    North East TN
    Full Name:
    Kent Wright
    #3 k wright, Feb 28, 2006
    That is my hope, that they will fit without an adapter, seat mount. The stock seats bolt to sliders that bolt to the car. I'll post the results of what I find out. The vendor sent me a photo of the 911 bracket, at worst it will serve as a template for fabricating brackets.

    Ken
     

Share This Page