Spark Plug Spanner | FerrariChat
Buy

Spark Plug Spanner

Discussion in '308/328' started by cronin, Jun 8, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cronin

    cronin Karting

    May 21, 2009
    53
    Twin Cities of MN
    #1 cronin, Jun 8, 2009
    Does anyone know where to get a mondial 8 spark plug spanner or something that will work? I dont have the tool kit but my porsche spanner works for the front four plugs but doesnt bend in the right way to reach the far plugs. Any help would be appreciated.
    thanks
     
  2. samba-lee

    samba-lee Formula Junior

    Aug 28, 2006
    677
    Manchester, UK
    Full Name:
    Lee Griffiths
    #2 samba-lee, Jun 8, 2009
    I use a small (8") 3/8" drive ratchet in a short (2") extension into a standard plug socket. It just misses the bulkhead enough to get it down the front bank on my GT4.

    Lee

    '77 GT4
     
  3. cronin

    cronin Karting

    May 21, 2009
    53
    Twin Cities of MN
    #3 cronin, Jun 8, 2009
    it seems like a standard plug socket is too fat to fit into a mondial/308 engine and i was under the impression they require a special socket so that it fits properly. let me know if im wrong.
    thanks
     
  4. teveo

    teveo Formula Junior

    Oct 1, 2005
    403
    Norway
    Full Name:
    Trond Vidar
    #4 teveo, Jun 8, 2009
  5. fgcfire8

    fgcfire8 Formula Junior

    Jan 19, 2008
    459
    Montpelier Va
    Full Name:
    Frank Castelvecchi
    #5 fgcfire8, Jun 8, 2009
    For a spark plug socket on my Mondial 8 I used a 3/8 drive craftsman with short extension and I had to turn it down just a bit to get it to fit for some of the cylinders, chucked a 3/8 adapter into drill press and lightly ground on it with a hand held grinder--it did not take much can still read the stampings on the side.
     

Share This Page