spark plug wires | FerrariChat
Buy

spark plug wires

Discussion in '308/328' started by Doright, Sep 15, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Doright

    Doright Karting

    Jan 19, 2007
    73
    Pahrump NV.
    Full Name:
    Dennis B.
    #1 Doright, Sep 15, 2009
    Can a set of 8k ohm wires be used with out messing up the computer on an 81 GTSI
     
  2. DenisB

    DenisB Formula Junior

    Jul 21, 2007
    511
    Cape Cod Ma.
    Full Name:
    Denis B.
    #2 DenisB, Sep 15, 2009
    I use'm on my '82 mondial and the car runs awsome
     
  3. Ferraripilot

    Ferraripilot F1 World Champ
    Owner Project Master

    May 10, 2006
    17,849
    Atlanta
    Full Name:
    John!
    #3 Ferraripilot, Sep 15, 2009
    Use a good quality plug wire and you will be satisfied for years. Taylor, Magnecor, Kingsborne are all good and will last a long time. Most off-the-shelf stuff will last for a year and then resistance will go through the roof and your engine will misfire or blah blah blah. Do it right the first time.

    I had Accel 4040R wires on for about a year and half and they were utter crap after that time frame. Cross-talking, high resistance, misfiring etc. I installed a set of Taylor wires and they are just fantastic. Huge difference
     
  4. lostbowl

    lostbowl Formula 3

    Apr 30, 2009
    1,246
    Michigan
    Full Name:
    Tom
    #4 lostbowl, Sep 15, 2009
    Just done my 82 and purchased the wires from Dave Helms, great servive and product!
    Lostbowl
     
  5. Ferraripilot

    Ferraripilot F1 World Champ
    Owner Project Master

    May 10, 2006
    17,849
    Atlanta
    Full Name:
    John!
    #5 Ferraripilot, Sep 16, 2009
    Yeah Dave uses Taylor wires and he also speaks very highly of them. Good stuff
     
  6. Jet Lag

    Jet Lag Karting

    Dec 6, 2003
    173
    Seattle
    Full Name:
    Robert Bangs
    #6 Jet Lag, Sep 16, 2009
    Last edited by a moderator: Sep 7, 2017
    Does anyone have any idea what this plug wire is off of and where I can find some of same? The plastic part is 11 cm - a tad short for the 308, but the cap can slide up and down on the wire to accommodate and the cap actually fits better than OEM.

    A friend gave this to me many years ago when I was still nuts about keeping everything OEM. Now he can't even remember giving it to me much less where it came from.

    Anyway, I would love to try a set; but I haven't been able to find them anywhere.
    Image Unavailable, Please Login
     

Share This Page