speed sensor for becker sat nav | FerrariChat

speed sensor for becker sat nav

Discussion in 'Technical Q&A' started by dpsuk999, Apr 8, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dpsuk999

    dpsuk999 Formula Junior

    Feb 12, 2004
    264
    Leeds UK
    Full Name:
    Dave
    #1 dpsuk999, Apr 8, 2004
    Iam in the process of fitting the becker 4720 traffic pro to my 91 348TS and the system requires a speed signal (GAL) Any help much appreciated to identify where i can pick this signal up from (wiring diagram's, wire colour etc.)

    Thanks,
     
  2. buschi

    buschi Rookie

    Feb 19, 2007
    44
    Munich/Germany
    #2 buschi, Aug 14, 2008
    Good evening!

    I found this old posting while browsing through the f-chat, looking for the same answer....

    In my case, its also a BECKER 7823 TrafficPro Highspeed and i want to install it into my 308 GTS-QV (Euro).
    (but i know, that 348 and 308 using the same speedo sensor)

    Can the becker deal with the signal output of our speed sensor?!?

    In the Becker instruction manual it's said:

    0 to 4 kHz squareed signal (not inductive)
    low gain <1.5V ; high gain 5 to 16V

    What kinda signal comes out of our sensor???

    Thanks,
    cheers,

    Alex.


    .
     
  3. buschi

    buschi Rookie

    Feb 19, 2007
    44
    Munich/Germany
    #3 buschi, Aug 17, 2008

    Nobody?!?!
     

Share This Page