Standard Width Lift? | FerrariChat

Standard Width Lift?

Discussion in '360/430' started by unogib, Jun 10, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. unogib

    unogib Formula Junior

    Joined:
    Jun 26, 2006
    Messages:
    403
    Location:
    USA
    I've been doing some calculations for a new 4 post lift in my garage and on paper it seems the width of the tires on a 430 are just a little too wide to fit on a standard width 4 post lift.

    Anyone using this setup? I'd like to stay away from the extra wide version if possible.

    Thanks!
     
  2. vincep99

    vincep99 Formula 3 Owner Silver Subscribed

    Joined:
    Jun 8, 2009
    Messages:
    1,941
    I have a standard-width lift and my 360 fits just fine. Not sure if the 430 is wider than the 360.

    Have you considered asymmetrical arms? Makes thing easier. I have symmetrical, the TR was especially tricky. Not such a problem with the 360 tho
     
  3. bigsquat

    bigsquat Formula Junior Rossa Subscribed

    Joined:
    Nov 4, 2013
    Messages:
    479
    Location:
    Westchester, NY
    Full Name:
    Troy
    I also have a standard width lift that my 360 lives on and I believe that the widths between the cars is identical or almost so. No problems with the car fitting at all.
     
  4. unogib

    unogib Formula Junior

    Joined:
    Jun 26, 2006
    Messages:
    403
    Location:
    USA
    What brands of lifts do you guys own?

    Thanks in advance!
     

Share This Page