starter 348 | FerrariChat
Buy

starter 348

Discussion in 'Technical Q&A' started by tallzim, May 5, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tallzim

    tallzim Rookie

    May 3, 2012
    17
    montreal quebec cana
    Full Name:
    denis bissonnette
    #1 tallzim, May 5, 2012
    hi every body i have a 0nother problem ,on my ferrari 348 1990 black.... when i start...the car ,i let the key on to start, there is nothing, and suddenly after 2, 3, 4, 5 seconds the starte,r do is job, not always, but some time.... i have to turn the switch on and go to the back and jump the positive on the small connection, just beside probably the selenoid wire, what you thinks is the problem????? thanks to all of you, p.s excuse my english im french its not my fault lol..
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, May 6, 2012
    Hello and welcome Denis. :)

    It sounds like the contacts in the starter motor are worn out and need replacing.

    It's not a big job to remove and replace them. :)
     
  3. redzone

    redzone Formula 3
    Owner

    Mar 31, 2007
    1,218
    Beach
    Full Name:
    John
    #3 redzone, May 6, 2012
    I had the same problem here for along time. I found several things & fixed them one at a time. There were loose connections in the steering column at the connnectors for the ignition switch. On my car it appeared that a prior owner had made repairs that were not of the best quality so I soldered them together. Get a test light & turn the key to the crank position & start checking.Buy a Porsche,thats my plan,no more grief!
     

Share This Page