Starting problem on my 308 GTBi 1983 | FerrariChat

Starting problem on my 308 GTBi 1983

Discussion in '308/328' started by Kedde Blik, Jul 30, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Kedde Blik

    Kedde Blik Rookie

    Jul 30, 2008
    11
    Denmark
    Hi
    Can anybody help my with this problem?
    I am experiencing some trouble when starting up my 308GTBi from 1983. Not everytime, but maybe every 3-4 times when
    i try to start it.
    The engine does as follows: When the engine is cranked, its starts as normally and goes on up to app. 2000 RPM, and then
    it cuts of almost as if the ignition was taken away. It does this 3-4 times, and then its starts whitout any trouble.
    In addition to this the car runs absolutely fine, has all the power it used to and when running there is absolute nothing wrong
    with it...
    Has anybody experienced this before?? My best guess is to have a look at the electrics, and go through all conections especially
    arround the ignition coils as it seems to be the electrics on all cylinders that are cut off at once...
     
  2. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,562
    Birmingham, AL
    Full Name:
    Tommy
    that's odd

    I can't wait to see how this plays out. It is nice to know what I may be experiencing in the future and how to fix it
     
  3. f308jack

    f308jack F1 Rookie

    Jun 7, 2007
    4,300
    Cape Town, South Afr
    Full Name:
    Jack Verschuur
    It stands to reason that it gets too much air if it proceeds to idle at 2000rpm. I'd check the cold start installation. Block off the air and unplug the cold start injector, and see if that makes a difference. Just a wild stab at it.
     
  4. Kedde Blik

    Kedde Blik Rookie

    Jul 30, 2008
    11
    Denmark
    To F308jack
    Thanks for your input... I will try to look at it.
    However it does not idle at 2000 rpm when it is running.. then the idle speed is normal. It is only in the 1-2 seconds
    where the engine "allmost" starts that it quickly moves up to 2000 rpm, and then its rapidly cut of...
     

Share This Page