Starting problem | FerrariChat
Buy

Starting problem

Discussion in 'Ferrari Discussion (not model specific)' started by tony88tr, Apr 29, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tony88tr

    tony88tr Rookie

    May 9, 2009
    3
    chambly,qc.canada
    Full Name:
    tony petrozza
    #1 tony88tr, Apr 29, 2023
    My Testarossa 88’ is not firing up .. starting…. Batter fully charge … gaz full up … it doesn’t want to go ?? What could this be ??
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,763
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Apr 29, 2023
    Do you mean:

    1. The starter spins the crankshaft, but the engine doesn't fire, or

    2. The starter does not operate?

    If #1, confirm/deny if spark is occurring when the starter is spinning the crankshaft (using a timing light or a spark tester).

    If #2, unplug/replug the white w connector on the LH side of the fuse-relay panel and the square 9-pin C11 connector under the coolant expansion tank.
     
    paulchua likes this.
  3. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,763
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #3 Steve Magnusson, May 1, 2023
    Did you give up? If it is a no-spark-when-cranking situation, there is a (very flaky) round 4-pin connector under the coolant expansion tank that connects the flywheel sensors to the ignition system -- it's another one that doing an unplug/replug is an easy first diagnostic step.
     
    paulchua likes this.

Share This Page