Steering wheel spacer (SWS) for pre 1996 355? | FerrariChat
Buy

Steering wheel spacer (SWS) for pre 1996 355?

Discussion in '348/355' started by PBE624, Dec 17, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PBE624

    PBE624 Formula Junior

    Jan 18, 2005
    397
    De Panne Belgium
    Full Name:
    Frank
    #1 PBE624, Dec 17, 2009
    Hi all,m

    I was looking at 355 models for sale and as you may know, the earlier non-airbag models differ a bit from the 1996 and after airbag models as far as steering wheel is concerned.

    Since I previously had a Hill engineering SWS on my 328, I wanted to find out if they had a similar one for the 355, as I think it would help me fit in.

    However, Hill Engineering told me they only have the SWS for airbag models... :-(

    So, question is: does anybody know if SWS is available somewhere for the non-airbag 355 models ?

    Cheers,
    Frank

    P.S. could not find answer in my searches so if answer exists already, link is fine :)
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,710
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Dec 17, 2009
    I'm sure Hill know best but since the non-airbag 355 is effectively a 348 column I would have thought no problem since their (excellent) standard unit is listed for the 348
     
  3. PBE624

    PBE624 Formula Junior

    Jan 18, 2005
    397
    De Panne Belgium
    Full Name:
    Frank
    #3 PBE624, Dec 18, 2009
    Hi Jimmie,

    never thought of that, if so, I have seen some threads about the 348 and steering wheel spacers so will do some research and check again with Hill.

    Best regards,
    Frank
     

Share This Page