Sticky problem mirrors control | FerrariChat
Buy

Sticky problem mirrors control

Discussion in '348/355' started by Geohop, Apr 9, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Geohop

    Geohop Karting

    Feb 2, 2013
    82
    Kemah Texas
    Full Name:
    George
    #1 Geohop, Apr 9, 2013
    I'm doing sticky chores. Problem: on the small module with the mirror remote I found that the added button below the mirror control appears hard wired with no connector. It is for the radar detector but does not work. Detector remains on at a very high volume. The surface of this small module has a pretty bad case of the stickies. Has anyone removed stickies with the piece still partially attached to the console (by a short bundle of wires going into the module)? Thank you!
     
  2. JSBMD

    JSBMD Formula Junior

    Mar 17, 2007
    453
    The OC
    Full Name:
    John
    #2 JSBMD, Apr 9, 2013
    You can get the goo off using rubbing alcohol. That can be done with the piece in place. The question then becomes "How did you refinish the other parts?" because the bare plastic (which looks ok to me) may not match the refinished rest of the interior.

    Or you could just cut the non-functioning wire.....
     
  3. Geohop

    Geohop Karting

    Feb 2, 2013
    82
    Kemah Texas
    Full Name:
    George
    #3 Geohop, Apr 9, 2013
    Thanks, what to do with the non functioning switch is my next issue. I am just a bit leery about clipping the 5 or so wires. Not much slack if I need to hook it back up
     
  4. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,974
    MD and NE
    Full Name:
    Robbie
    #4 285ferrari, Apr 10, 2013
    Give us a call if you want the sticky goo gone forever
     
  5. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #5 Dave rocks, Apr 10, 2013
    Robbie just did some parts for me and did a great job and the turn around was sick - like 2 days - WOW!
     
  6. Geohop

    Geohop Karting

    Feb 2, 2013
    82
    Kemah Texas
    Full Name:
    George
    #6 Geohop, Apr 10, 2013
    Robbie I can get this little module out without cutting about 6 wires controlling the radar detector. Front panel and buttons are soon on the way when I can unhook the connectors from each button (tomorrow?) Thanks. Very happy with the HVAC and 3 vents - starting to shape up. How about thr door handles? Any ideas how to get them out?
     
  7. dcrews85tr

    dcrews85tr Karting

    Aug 1, 2005
    72
    Kansas City
    Full Name:
    Doug
    #7 dcrews85tr, Apr 10, 2013
    I have sent Robbie sticky parts for the last 3 of the 4 Ferrari's I have owned. The latest was for my newly acquired 550M. The results were great! I have received the same great results and speedy service every time I have to deal with the "stickies". Robbie will provide the expertise and results any Ferrari is deserved. See his website for DIY removal and reinstallation instruction.
     

Share This Page