Storage shells for jack and warning triangle | FerrariChat
Buy

Storage shells for jack and warning triangle

Discussion in '206/246' started by isuk, Dec 11, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. isuk

    isuk F1 Rookie

    Nov 11, 2005
    3,334
    UK
    Full Name:
    Iain
    #1 isuk, Dec 11, 2012
    Does anyone have a source for the plastic shells (cups) that are riveted to the front frame behind the radiator that the jack and warning triangle are supported in when stored against the front of the spare wheel well? I've drawn a blank trying to find any thus far.
     
  2. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,356
    E.S.
    Full Name:
    Alberto
    #2 swift53, Dec 13, 2012
    Iain, do you have a photo or a reference to a diagram? This would help considerably.
    I am assuming it is fibreglass?

    As I do not have the triangle or the jack, but aware of the mounting location, I will look through the items I have, and possibly can find it.

    Once identified, I can make it for you.

    Regards, Alberto
     
  3. ENZOSON

    ENZOSON Formula Junior
    Silver Subscribed

    Jun 3, 2004
    660
    Erie, Colorado
    Full Name:
    PIETRO
    #3 ENZOSON, Dec 13, 2012
  4. HMB-Dino

    HMB-Dino Formula 3
    Silver Subscribed

    Jun 28, 2010
    2,295
    Pebble Beach, CA
    Full Name:
    RonG
    #4 HMB-Dino, Dec 13, 2012
  5. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,356
    E.S.
    Full Name:
    Alberto
    #5 swift53, Dec 13, 2012
    Thus, the round plate is metal and appears to be spot welded? My guess, without even looking, is that the part in question is nowhere near my car, as the nose was wrong, patched, botched, etc.

    If someone had dimensions, can be made in metal, and at this stage, I think easier in the USA. :)

    Regards, Alberto
     
  6. isuk

    isuk F1 Rookie

    Nov 11, 2005
    3,334
    UK
    Full Name:
    Iain
    #6 isuk, Dec 14, 2012
    Yes Pietro, that's the storage cup for the base of the jack. There is also a rectangular one on the opposite side that acts as the support for the base of the warning triangle case.
     

Share This Page