Stupid Question for Motor Mounts | FerrariChat

Stupid Question for Motor Mounts

Discussion in '308/328' started by manta147, Apr 5, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. manta147

    manta147 Karting

    Joined:
    Sep 7, 2006
    Messages:
    128
    Location:
    seekonk,mass
    Full Name:
    carter petter
    Hey Guys,
    Getting ready to pull the engine on by '82 2v.Trying to unbolt the motor mounts,and the bolts won't budge.Just to make sure I'm doing this right,I need to loosen the big bolt on the middle that goes through the frame,correct? Is it safe to use heat on it?I'd rather not but don't see any other way.What am I doing wrong?
    Thanks in advance for your help.
    Carter
     
    manta147, Apr 5, 2014
    #1
  2. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,566
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    impact gun
     
    yelcab, Apr 5, 2014
    #2
  3. manta147

    manta147 Karting

    Joined:
    Sep 7, 2006
    Messages:
    128
    Location:
    seekonk,mass
    Full Name:
    carter petter
    Thank you,just wanted to make sure I was hitting the right bolts.
     
    manta147, Apr 6, 2014
    #3
  4. lostbowl

    lostbowl Formula 3

    Joined:
    Apr 30, 2009
    Messages:
    1,246
    Location:
    Michigan
    Full Name:
    Tom
    Check for shim washers and make note of where they go. Lost
     
    lostbowl, Apr 6, 2014
    #4
  5. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,380
    Location:
    Houston, Texas
    Full Name:
    Bubba
    Yep don't let them fall on the floor and then wonder!

    I say no heat as they have rubber.

    I always wanted to try the ones from Summit, nylon, and see what vibration increases you'd see....
     
    BigTex, Apr 6, 2014
    #5
  6. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,380
    Location:
    Houston, Texas
    Full Name:
    Bubba
    Continue to hit......get the ling breaker bar!

    36" is mandatory on Ferrraris..
     
    BigTex, Apr 6, 2014
    #6

Share This Page