Sun visor adjustment | FerrariChat
Buy

Sun visor adjustment

Discussion in '308/328' started by Paul308GTSi, May 1, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Paul308GTSi

    Paul308GTSi Formula 3

    Oct 26, 2008
    1,003
    Queensland Australia
    Full Name:
    Paul D
    #1 Paul308GTSi, May 1, 2010
    The sun visors in my car desperately need to be adusted so that they stay up when put up ... I can see one small phillips head screw and not much else. This screw does not seem to be able to be tightened and may well be frozen.

    Has anyone else been through this ?
    Has anyone rebuilt their sun visors ?
     
  2. Paul_308

    Paul_308 Formula 3

    Mar 12, 2004
    2,345
    #2 Paul_308, May 1, 2010
    Trying to remember when I leathered my headliner and recovered the visors, there is a stainless clamp which tightens onto the main swivel rod. The screw had to be removed to slide the rod out soas to remove the visor, didn't have problems removing mine. The wee C clamp, about 3/16" wide and threads on one side, is unfortunately buried into the covering material, tough to get at without removing the tape which is sewn onto the edges.

    FYI, fun time buying a cow hyde for your Ferrari...cost about $450. End results great, far better than the cotton weave headliner which was coming loose from the roof and had hair oil stains immediately above the driver.

    Try to work the screw free, then tighten it. (which you've already tried) GL
     

Share This Page