360 - Susp refresh | FerrariChat

360 Susp refresh

Discussion in '360/430' started by one4torque, Mar 23, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,720
    Houston
    Full Name:
    One4torque
    6 yr 360 owner here— thrilled at how car feels w new front upper and lower ball joints!

    got car w 19k miles
    Now at 31k miles

    the feedback is ten fold, the turn in go cart, the overall feel is substantial

    I never did ball joints because my wiggle test showed no play… but the susp parts are under load and it’s very hard to check ball joint wear by hand. Unless I was doing it wrong

    I just pressed and glued in joint last night… the new joints are precision and require some force to move…. The old joints were oval… meaning there were worn spots in the sphere and socket that came and went away as you spin the ball.

    I’ll be doing the rears next.

    im really pleased w the road feel now. And the responsiveness on a sweeper…. I guess my wheels are pointing in the same direction now,,,,,,,;$$
     
    EastMemphis likes this.
  2. Ghostdiver

    Ghostdiver Formula 3

    Mar 18, 2005
    1,348
    Southeast Texas
    Full Name:
    Wally Hollar
    Damn you...22k when I bought it. 51k now and I think it feels like it's on rails too, no describable play in the suspension either. So, guess I know what my next project will be.....
     
    one4torque likes this.
  3. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,720
    Houston
    Full Name:
    One4torque
    I thought it was normal … until I did the r-r… it is notable.
     
    Ghostdiver likes this.

Share This Page