Do i need to push this little ring out of the end link before i press in the new bushing (Superformance) Image Unavailable, Please Login Image Unavailable, Please Login Sent from my iPhone using FerrariChat
Are you sure that's not the outer shell of the old bushing? I seem to remember when I did mine the bushing pressed straight into the aluminum link, not into a sleeve in the link!
Just use a vernier and measure the OD of new new bush vs. the ID of the hole. Its a press fit, so their should only be a few thou interference fit.
Yes - it looks like your outer bushing is still in there. Just did these using Superformance bushes. If you are unsure, just take a caliper and confirm the ID. Photo shows bush out on top and new SF bush installed in bottom. Image Unavailable, Please Login Sent from my iPhone using FerrariChat