News

Take apart master cylinder

Discussion in 'Technical Q&A' started by papparazzi, Jun 22, 2009.

  1. papparazzi

    papparazzi Rookie

    Nov 12, 2004
    43
    Carlisle, MA 01741
    Full Name:
    Christian Delbert
    I'm trying to unscrew the four bolts to my master cylinder ( on my 308) but can't do it without removing the brake fluid tank on top of it. Does it just pull off the master cylinder(rubber gaskets are keeping it in?) or is there some Machiavellian way to take it off? Thanks for any help provided on this.
     
  2. To remove this ad click here.

  3. eurogt4

    eurogt4 Karting

    Apr 15, 2006
    243
    Sacramento, CA
    Full Name:
    Mike
    It should just pull straight up out of the rubber grommets. Don't pry with screwdrivers, don't want to poke a hole or crack it. Be careful of fluid splashing out.
     
  4. papparazzi

    papparazzi Rookie

    Nov 12, 2004
    43
    Carlisle, MA 01741
    Full Name:
    Christian Delbert
    Thanks EuroGT I'm on it!
     

Share This Page