Technocrats: what exactly is defferent between 360 and F430 manual gearboxes? | FerrariChat

Technocrats: what exactly is defferent between 360 and F430 manual gearboxes?

Discussion in 'Technical Q&A' started by 348SStb, Jul 29, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 348SStb

    348SStb F1 Rookie Owner

    Joined:
    Apr 9, 2004
    Messages:
    2,991
    Location:
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    The two gearboxes seem pretty much the same, and I haven't found any literature on this. What changes, if any were made for the F430 manual gearbox?

    Also, as a separate topic, is the Audi R8 gearbox made by the same company in Europe that makes the Ferrari gearbox? If so, what is the name and location of the company? Is the R8 gearbox identical to either the 360 or the F430 gearbox?

    Thanks. I was having a debate with my Dad and we need to clear this up!
     
    348SStb, Jul 29, 2008
    #1
  2. windsock

    windsock Formula 3 Rossa Subscribed

    Joined:
    Nov 29, 2006
    Messages:
    1,160
    Major difference is the e-diff. This is why there is a F-1 pump even on the manual gearboxes. There are some other slight internal changes.
     
    windsock, Jul 29, 2008
    #2
  3. 348SStb

    348SStb F1 Rookie Owner

    Joined:
    Apr 9, 2004
    Messages:
    2,991
    Location:
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    Anyone else? Please?
     
    348SStb, Jul 30, 2008
    #3
  4. Schumi76

    Schumi76 Formula Junior

    Joined:
    Feb 15, 2006
    Messages:
    329
    Location:
    NC
    Full Name:
    Marco
    As far as i know Getrag is the name of the company who makes the gearboxes for Ferrari, Porsche, Mercedes and so on.
    It's a German company. They have a base in North Carolina but the gearboxes for the cars mentioned above are made in Germany.


     
    Schumi76, Jul 31, 2008
    #4

Share This Page