Testarossa engine hatch insulation

I need one also as mine has fallen off in lots of small bits. Best idea is to remove the panel and do it away from the car to stop all that foam getting all over your nice flat 12. I think they are unobtainable from ferrari but a kit car stockist must surley have some heat resiastant foam.

 

There are so many differences between models, you may not need one at all ,like mine

P

 

Do a search on this. There have been a few threads on this in the past. I got a Ferrari original from Ricambi about a year ago (not cheap). However many F-chatters had a few creative ideas at a MUCH more attractive $$$ and I kick myself because most onlookers wouldnt know the difference.

 

McMaster Carr has many sheets different options. Choice of thickness (1/4, 3/8, 1/2, etc.). Many have adhesive backing to stick to the lid, and several have an aluminized surface. Peruse McMaster-Carr.com. Search for item 9349K26 on page 3486. May not be exactly what you want, but there are many to choose from.

Jim S.

 

Try this:

http://www.ferrariaustralia.com/Technical/TR%20and%20512%20engine%20hood%20insulation.htm

 

Here's mine.
Image Unavailable, Please Login

 

Very nice !!!
I like the fresh & clean look !

 

http://******************/forum/showthread.php?t=29959&highlight=engine+insulation

Here's a link to the thread that i posted when I replaced mine. It's looking good now.

 

Does anyone know if the insulation available from McMaster-Carr or Summit Racing comes in black with an adhesive backing? I don't want the words "Thermo-Tec" under the hood , and black is better than aluminum.
Thanks
Jimbo

 

We had a big thread about it here about a year ago..... go and find it !

I don't mean this one for the 512TR....!

Any airco insulating store sells this stuff to you for just a few Dollars... piece-of-cake !

In my case it cost me $ 10 in all....and I made two pieces for the 512TR.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login