(Testarossa) Feeding wires from the cabin into the front truck area | FerrariChat
Buy

(Testarossa) Feeding wires from the cabin into the front truck area

Discussion in 'Boxers/TR/M' started by Threeofnine, Jul 2, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Threeofnine

    Threeofnine Formula Junior

    Dec 11, 2020
    393
    Birmingham, AL USA
    Full Name:
    Jarrod Heath
    #1 Threeofnine, Jul 2, 2024
    I’m trying to hardwire a dash cam, radar detector and a laser jammer system into my 88.5 US spec Testarossa. I need to run 3 wires from the cabin into the front trunk area but I’m having a very difficult time.

    I cannot find any grommet that will allow a pass through. There are two openings for wire harnesses that obviously pass through. I have been trying to feed a though them but so far I’ve been unsuccessful. Is there any trick or method to accomplish this?
     
  2. EZORED

    EZORED Formula 3
    Silver Subscribed

    Nov 24, 2007
    1,033
    Scottsdale, AZ
    Full Name:
    Dennis
    #2 EZORED, Jul 4, 2024
    On my 512tr if you carefully remove the fuse box. Disconnect power first, then remove 2 screws at top, lift up and pivot the top out and gently pull toward yourself. On the drivers side of the cavity you can easily pass wires into the cabin. , and then I took a straighten coat hanger with a hook on one end and feed from the trunk into the drivers foot well. attach wires to hook and pull thru the firewall.
     
    71veedub, turbo-joe and Threeofnine like this.
  3. Threeofnine

    Threeofnine Formula Junior

    Dec 11, 2020
    393
    Birmingham, AL USA
    Full Name:
    Jarrod Heath
    #3 Threeofnine, Jul 4, 2024
    Thank you! I’ll try this.
     

Share This Page