Testarossa glove box switch button | FerrariChat

Testarossa glove box switch button

Discussion in 'Boxers/TR/M' started by leslie_choo, Dec 25, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. leslie_choo

    leslie_choo Formula Junior

    Joined:
    Aug 5, 2012
    Messages:
    444
    Location:
    Singapore
    Full Name:
    BCChoo
    Hello

    Has anyone changed their glove box switch button before ? Do I have to remove the console ? Or I just remove the switch button ? What's the best way to replace this switch button ? Thanks


    Sent from my iPhone using Tapatalk
     
    leslie_choo, Dec 25, 2014
    #1
  2. ago car nut

    ago car nut F1 Veteran Silver Subscribed

    Joined:
    Aug 29, 2008
    Messages:
    5,495
    Location:
    Madison Ohio
    Full Name:
    David A.
    Yes I have removed and cleaned my 87 TR switch. You can carefully remove the switch from the console. I posted a photo of disassembly on this TR forum. I not too compute lit, but if you do search on here it is available. look under ago car nut posts. I also removed and cleaned the window switches and the inst. dimmer. A big difference in operation after cleaning.


    Ago
     
    ago car nut, Dec 25, 2014
    #2
  3. ozziindaus

    ozziindaus F1 Veteran

    Joined:
    Aug 16, 2012
    Messages:
    9,799
    Location:
    Detroit
    Full Name:
    Sam
    ozziindaus, Dec 25, 2014
    #3
  4. dkyranakis

    dkyranakis Formula Junior

    Joined:
    Nov 24, 2013
    Messages:
    258
    Location:
    Centreville, DE
    Full Name:
    Demetri Kyranakis

    I had to change my 2 small ECU's that control the thermo couples for the cool down lights to stop going nutZ. Expensive at 700 or so x2 plus labor, but it worked. Haven't had a false warning since!!


    Sent from my iPhone using Tapatalk
     
    dkyranakis, Dec 25, 2014
    #4
  5. leslie_choo

    leslie_choo Formula Junior

    Joined:
    Aug 5, 2012
    Messages:
    444
    Location:
    Singapore
    Full Name:
    BCChoo
    Thanks everyone , so looks like I could remove the switch without dismantling the console Which is good news. I will try it ..


    Sent from my iPhone using Tapatalk
     
    leslie_choo, Dec 26, 2014
    #5
  6. ozziindaus

    ozziindaus F1 Veteran

    Joined:
    Aug 16, 2012
    Messages:
    9,799
    Location:
    Detroit
    Full Name:
    Sam
    I don't think I need to change them. When I wiggle the connector, the buzzer and light turns off. It's a common problem.
     
    ozziindaus, Dec 26, 2014
    #6
  7. dkyranakis

    dkyranakis Formula Junior

    Joined:
    Nov 24, 2013
    Messages:
    258
    Location:
    Centreville, DE
    Full Name:
    Demetri Kyranakis
    I hope you are correct. Mine was painful 💵💵💵💵💵


    Sent from my iPhone using Tapatalk
     
    dkyranakis, Dec 26, 2014
    #7

Share This Page