Testarossa light switch assembly issue | FerrariChat

Testarossa light switch assembly issue

Discussion in 'Technical Q&A' started by rsqrd930, Sep 8, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rsqrd930

    rsqrd930 Rookie
    Silver Subscribed

    Sep 5, 2011
    21
    Phoenix AZ
    Full Name:
    Richard Roth
    #1 rsqrd930, Sep 8, 2011
    Hi all, back after long absence..
    Well, the testarossa light switch stalk has pulled out of the housing, and it wasn't even engaging when it was in there... I have the steering wheel off and the unit exposed and removable... Now what?

    Can this be fixed? The area in question is riveted unlike the turn signal area which is screwed.. Question is, am I screwed too? :)

    Do I have to buy a new part or can this be fixed... Any advice would be appreciated of course..

    Ps used to be rsqrd308 but I lost access for some reason..

    Tia...
     
  2. vincenzo

    vincenzo F1 Rookie

    Nov 2, 2003
    3,373
    #2 vincenzo, Sep 9, 2011
    how about posting some photos to make the issue more clear...
    rgds,
    Vincenzo
     
  3. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,313
    South East
    Full Name:
    Jimmie
    #3 greyboxer, Sep 9, 2011
    Verrell is the repair specialist
     
  4. Paul_308

    Paul_308 Formula 3

    Mar 12, 2004
    2,345
    #4 Paul_308, Sep 9, 2011
    Your injured part will have been used on other models. Without a photo the only 2 facts available to us are Testarossa and light switch.

    Your profile needs your car year and model for starters. And a photo of the part for final lift off. Then the help comes pouring in. Voila
     

Share This Page