The correct way to rack a 360 | FerrariChat
Buy

The correct way to rack a 360

Discussion in 'Technical Q&A' started by syrinx001, Sep 3, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. syrinx001

    syrinx001 Rookie

    Jun 8, 2011
    18
    Las Vegas NV
    Full Name:
    Tony
    #1 syrinx001, Sep 3, 2011
    I have to pull the wheels off my 360 modena to have the rims re-dipped, where are the correct locations to place the jack stands?
     
  2. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    #2 saw1998, Sep 3, 2011
    About six inches in from the side (ahead of the rear wheels) you will see a circular hole in the undertray. Place the jack there and you'll lift both wheels on that side of the car.

    For jack stand placement, take a look at this thread:

    http://www.ferrarichat.com/forum/showthread.php?t=272827&highlight=360+jack+stands
     

Share This Page