The eurospares "challenge" wing, anyone have one

My understanding is that you can't just bolt a wing to the deck lid without some kind of support without risking damage to the deck lid. On my car there are rods underneath the deck lid and dzus fasteners on each side to make sure that there is no twisting under load. I think SoCal has a deck lid and wing for sale in the Classified section if that helps.

 

Found one for you

http://www.ferrarichat.com/forum/ferrari-parts-collectibles/548701-355-challenge-wing-decklid-assembly.html

 

Are you referring to part #177829? The Tubi "challenge" wing? If so, here's the best pic I got ...
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Maybe it's just me, but I don't find this Tubi wing to be that appealing. Looks too small for the car.

 

And it seems you have to remove the wing to get in the bay.

 

Good point. Unless it bolts to the underside of the deck lid and lifts with the deck lid when you open it up.

 

There is really no way of getting around drilling you deck lid. I bought a spare one since i dont want permanently change anything stock.
The under support brackets and rivets are a must and can be bought from ferrari of houston. I have not installed the hood prop or the support rods that go from the support bracket forward to the deck or the dzus fasteners. Those will be coming soon.

 

The mounting brackets on that picture shows they turn inward and although they overlap the outside enough to likely scratch it, it appears they still screw into the lid

 

All the Tubi wing does is block the rear view mirror, and sit in stagnant airflow....

 

Isn't it the same wing that Steve Maxwell installed in his 348 Twin Turbo?

https://www.youtube.com/watch?v=6KajL7klumA

 

Yeah it is, I was just about to post the link too. Funny I just read about it here then the next post I click on has a video with it. What are the chances?

 

Not a fan.
355CH wing or the Rene's hill climb 355 wing
http://engineswap.wpengine.netdna-cdn.com/wp-content/uploads/2014/09/Ferrari-F355-With-Zytek-ZJ458-V8-02.jpg


Sent from my LGLS990 using Tapatalk

 

The magic of F-chat!

 

Rene's wing is bad ass... I wonder who makes it.

 

Maybe its just me.. big wings on f355s scream ricer and cheapen the otherwise beautiful look. Didn't ferrari spend a ton of time wind testing the f355... on a track car, maybe i could see the appeal, but is there a problem with down force and then at what speed does it work? Is the increased down force off set by drag etc etc.

 

I don't think Challenge wings look ricer at all.

 

On a street car with a speed limit of 85mph, i would think it would belong on your husbands Hyundai. Lol.

 

You should really stop thinking in that case.

 

Show us the bill when you have to repair your deck lid holes later on.

 

Image Unavailable, Please Login

Buy a 2nd lid[emoji41] sell it when you are done, break even.


Sent from my LGLS990 using Tapatalk

 

Obviously it is a personal choice. Not my cup of Tea on a street car but on any challenge car I have seen like Tims, Robbs, and Bobs, I think all those would look terrible without the wing.

They look really good when your behind them on the track. I think the 355 wing looks the best of the last 4 models in challenge trim. Dont really like 360 430 458 with wings but I am biassed.

 

Flying must be expensive for you.

 

Wings are for aeroplane's guys/gals