Tip for removing pinion for speedo driver in the gearbox | FerrariChat

Tip for removing pinion for speedo driver in the gearbox

Discussion in '206/246' started by chritin, Aug 26, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chritin

    chritin Rookie

    Jul 12, 2007
    38
    france
    Full Name:
    chritin regis
    #1 chritin, Aug 26, 2021
    Hello from France,

    I'm dismantling the gearbox on my Dino, but I've a probleme to remove this pinion (see picture). I removed the circlip, the pinion is moving on the axe, but I don't suceed to remove it completely from this axis. There is a resistance and I would like to know if I need to force more to remove it, or if there somethin else to do ?

    Thanks for any tip in that sense

    Regis

    Image Unavailable, Please Login
     
  2. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,523
    #2 racerboy9, Aug 26, 2021
    Might be just a small burr on the edge of the circlip groove. I would try a little more force. You could heat the pinion with a hair dryer to get a little more clearance.
     
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #3 yelcab, Aug 26, 2021
    If it were I, I would try a heat gun and a bearing puller to overcome the resistance.
     
  4. chritin

    chritin Rookie

    Jul 12, 2007
    38
    france
    Full Name:
    chritin regis
    #4 chritin, Aug 26, 2021
    Thanks for your answers, I will try with my heat gun, good idea.
     

Share This Page