Torque spec? | FerrariChat
Buy

Torque spec?

Discussion in '348/355' started by jqpd99, Mar 2, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jqpd99

    jqpd99 F1 Rookie
    Silver Subscribed

    Jul 25, 2007
    2,503
    Ottawa
    Full Name:
    DFO
    #1 jqpd99, Mar 2, 2008
    Hi All,

    Looking for a torque spec for the 6 torx bolts that hold the flywheel assembly together. Also if there is an online location where I could find these values, I would appreciate the link.

    Thanks
    DF
     
  2. trentw

    trentw Karting

    Jul 25, 2005
    93
    Ho-Ho-Kus, NJ
    Full Name:
    Warren Trent
    #2 trentw, Mar 2, 2008
    Last edited by a moderator: Sep 7, 2017
  3. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #3 Miltonian, Mar 3, 2008
    I don't think Ferrari wants you to know that the flywheel can be disassembled and repacked. The manual doesn't give any suggestions about how to do it, and there are no exploded views of the flywheel in the parts book. BUT, you can buy the Kluber grease at the dealership.

    When I did my 348 flywheel, I just tightened the Torx screws in sequence/pattern, a little at a time, until they "felt" right.
     
  4. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,057
    Tempe, Az
    Full Name:
    Rick Schumm
    #4 FandLcars, Mar 3, 2008
    FYI - Ricambi America lists this grease (not cheap) under the name Kuber. Not sure which spelling is correct, though.
     
  5. jqpd99

    jqpd99 F1 Rookie
    Silver Subscribed

    Jul 25, 2007
    2,503
    Ottawa
    Full Name:
    DFO
    #5 jqpd99, Mar 4, 2008
    Thanks for the info guys... I think I'll add a little loctite just to be sure.

    DF
     

Share This Page