Sign in
Forgot your password?
or Sign up
News

TR Radio Conceal Door Springs

Discussion in 'Technical Q&A' started by Octane116, Jul 1, 2005.

  1. Octane116

    Octane116 Rookie

    Nov 3, 2003
    20
    Near Milwaukee, WI.
    Full Name:
    Cliff M.
    #1 Octane116, Jul 1, 2005
    I am in the process of reassembly of my dash after reupholstery and need help in properly positioning door springs for the radio conceal door on my 86 TR. An electronic photo of an in place, open door that shows where the spring direction and is properly hooked would be great. I think my uphostery guy may have not installed the springs on the door correctly, which in turn has me scratching my head. Thanks for any help you can provide.
     

    2. To remove this ad click here.

  2. Octane116

    Octane116 Rookie

    Nov 3, 2003
    20
    Near Milwaukee, WI.
    Full Name:
    Cliff M.
    #2 Octane116, Jul 4, 2005
    Bump, bump
     
  3. Octane116

    Octane116 Rookie

    Nov 3, 2003
    20
    Near Milwaukee, WI.
    Full Name:
    Cliff M.
    #3 Octane116, Jul 5, 2005
    Is this a tough question or what?
     
  4. davemarian

    davemarian Guest

    May 24, 2005
    12
    #4 davemarian, Jul 6, 2005
    What's your e-mail address? I can send some directly to you at the highest resolution. DAVE
     
  5. davemarian

    davemarian Guest

    May 24, 2005
    12
    #5 davemarian, Jul 6, 2005
    I was looking at the door and hinge points last night. With the door assembled you can barely see the springs. The only part of the spring that I could see is vertical directly behind the pivots. Hope this helps. If you still need pictures send me your e-mail address. Thanks DAVE
     

    6. To remove this ad click here.

  6. Octane116

    Octane116 Rookie

    Nov 3, 2003
    20
    Near Milwaukee, WI.
    Full Name:
    Cliff M.
    #6 Octane116, Jul 6, 2005
    Not sure if there email harvesters in here so I sent my email in private message to you.
     

Share This Page