hi all, hoping somebody on here knows the factory tracking/geometry settings for a 360,if so please could you let me know, many thanks jon
Note: Before checking alignment and ride height ensure ; 1. check tyre pressures are correct 2. check clearance between pinion and rack ball journals for steering tie-rods on steering rack 3. check clearance between stub axle and ball joint of the steering tie road and between hub holder and ball joint of the reaer toe-in tie rod 4. check good working conditions of the dampers 5. ensure the vehicle is parked on level ground to measure height. 6. pull the parking brake and simulate passengers weight on the seats and on the floor panle using sacks filled with sand making up weight of 70kg for each seat plus 20kgs in luggage compartment. Image Unavailable, Please Login
