Traqmate Tach sreading on a 355 question | FerrariChat
Buy

Traqmate Tach sreading on a 355 question

Discussion in 'Tracking & Driver Education' started by vlamgat, Dec 7, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. vlamgat

    vlamgat Formula Junior

    Jan 9, 2004
    776
    #1 vlamgat, Dec 7, 2012
    Last edited: Dec 7, 2012
    Has anyone been able to get their Traqmate to show RPM when fitted to a 355?

    I have tried to pull a signal from the tach and from the coil, with and without changing the dip switch in the Traqdata II box; and with and without fitting a Motec tach sender unit between the coil signal and the Traqdata II. Nothing at all just a zero.

    I have tried another Traqmate, no difference and I have successfully pulled the tach signal to shift light.

    Any other suggestions appreciated.
     

Share This Page