360 - Tri Y Header Options | FerrariChat
Buy

360 Tri Y Header Options

Discussion in '360/430' started by Wrinckled, Dec 7, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Wrinckled

    Wrinckled Rookie

    Mar 16, 2021
    26
    Full Name:
    Kyle
    #1 Wrinckled, Dec 7, 2021
    I'm looking to stick with the tri y header design from Ferrari, however, it looks like all the aftermarket is 4-1. Does anyone know of a vendor that provides tri y design?
     
  2. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #2 clean512, Dec 7, 2021
  3. Wrinckled

    Wrinckled Rookie

    Mar 16, 2021
    26
    Full Name:
    Kyle
    #3 Wrinckled, Dec 7, 2021
    The shop I use here is a bit old-fashioned. If I gave them the euro headers to place on my US car, what modifications would they need to make in order for there to be no CEL?
     
  4. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #4 clean512, Dec 7, 2021
    Definitely a tune from AV which I'm using and absolutely love. To gain full purpose of no precat But they bolt right on.
     
  5. Wrinckled

    Wrinckled Rookie

    Mar 16, 2021
    26
    Full Name:
    Kyle
    #5 Wrinckled, Dec 7, 2021
    Isn't there a rail on top the US spec that isn't present on the euro?
     
  6. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #6 clean512, Dec 7, 2021
    Some had and some didn't. My car is a 99 so none
     
  7. priericky128

    priericky128 Formula Junior
    Silver Subscribed

    Feb 11, 2021
    703
    St. Louis MO
    Full Name:
    Rick
    #7 priericky128, Dec 8, 2021
    There are some euro headers with air rails and others without.
     
  8. RedTaxi

    RedTaxi F1 Rookie
    Silver Subscribed

    Mar 1, 2012
    3,340
    New Zealand
    Full Name:
    Glen
    #8 RedTaxi, Dec 9, 2021
    From those pictures in post #2 360 headers appear to be 4-1. Compared to 430 headers which are 4-2-1 tri-y with quite short primary tubes.
     
  9. 550nitis

    550nitis Formula Junior
    Silver Subscribed

    Feb 3, 2016
    760
    Houston
    #9 550nitis, Dec 9, 2021
    They are beautiful! Are you running Euro headers in your car then. How is the sound? Also do you get more resonance since the heat shields are not there?


     
  10. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #10 clean512, Dec 9, 2021
    I have a extra set or at least 1 left side. My car is a 99 and they have the heat shields on .right now but my goal is to remove the shield and have them coated .
     
  11. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #11 clean512, Dec 9, 2021
    That picture is both 360 manifold one is a 4 to 2 to 1 and the other is a 4 to 1
     
  12. 550nitis

    550nitis Formula Junior
    Silver Subscribed

    Feb 3, 2016
    760
    Houston
    #12 550nitis, Dec 9, 2021
    Do you have the an extra set of the euro or US?


     
  13. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,119
    Full Name:
    Josh @jtcarprojects
    #13 clean512, Dec 9, 2021
    I have one extra left euro and 1 right us cat header. And the 2 in my car
     

Share This Page