Trunk Lid Weather Strip | FerrariChat

Trunk Lid Weather Strip

Discussion in '365 GT4 2+2/400/412' started by Highmiler, May 31, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Highmiler

    Highmiler Formula Junior

    Dec 8, 2010
    414
    Missouri
    Full Name:
    Greg
    I have concluded my trunk lid lifts off its weatherstripping when driven with the windows down. I think this because exhaust gasses get into the car with the windows down but not when they are up.
    Steele Rubber Products has a slotted replacement with a round seal that looks like it will work.
    Does any one have another source or experience with Steel's product?
    Thanks,
    Greg
     
  2. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,679
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    Home page

    This guy has or can get all rubber trim parts. He orders bulk lengths from Italy. I have bought several pieces and all fit nicely even rubber/metal parts.

    Ken
     
  3. blkprlz

    blkprlz Formula 3

    Mar 24, 2007
    2,169
    Tampa bay
    Full Name:
    Bruce
    Albeit, very pricey I'd imagine if they're anything like the stock Ansa's he's trying to off-load @ $12,600 for all 4 sections :eek: Tubi could do it for that!!

    400 GT 400 i - Ferrari - Italian Cars
     
  4. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,679
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    I did not find Mr Fiat expensive for rubber parts. Ask him for a quote.
    Ken
     
  5. Highmiler

    Highmiler Formula Junior

    Dec 8, 2010
    414
    Missouri
    Full Name:
    Greg
    Hi,
    I followed the link, asked about my question and have heard nothing in response.
    I'm at a street rod event in York, PA and so is Steele Rubber Products.
    I'll ask them about our cars and report back.
    Greg.
     

Share This Page