Trunk seals 2018 488 | FerrariChat

Trunk seals 2018 488

Discussion in '458 Italia/488/F8' started by Domenicmac, Jun 19, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Domenicmac

    Domenicmac Rookie

    May 12, 2011
    15
    Chicago
    I recently purchased a 488 and with the humidity in Chicago, I have noticed when I open the trunk the black rubber seals that run up both sides seems to lift with the trunk. I can't figure out how they fit in the grove to keep them from lifting up. Anyone have or know how to fix this issue? only about 8 inches on each side comes out but I see if becoming a bigger problem in the future as I daily drive my 488 and open the trunk 2-3x a day.
     
  2. Eric C

    Eric C F1 World Champ
    Silver Subscribed

    Mar 20, 2009
    11,074
    St. Louis, MO
    Full Name:
    Eric
    I need to fix mine as well. I don't think there really is a groove. It's just held down in place with weather stripping adhesive.


    Image Unavailable, Please Login
     
    Domenicmac likes this.
  3. mdrums

    mdrums F1 Rookie

    Jun 11, 2006
    3,459
    Tampa FL
    My 2019 488 did the same. I took some Gorilla Glue Silicone adhesive I had in my garage and glued them back down. Never had a problem for thousands of miles after.
     
    Domenicmac likes this.
  4. Domenicmac

    Domenicmac Rookie

    May 12, 2011
    15
    Chicago
    Thank you
     
    mdrums likes this.
  5. docf

    docf Formula 3

    Sep 14, 2008
    1,422
    Florida
    Full Name:
    Gary
    Domenicmac likes this.

Share This Page