Tubi with standard tips fitted? | FerrariChat

Tubi with standard tips fitted?

Discussion in '360/430' started by scoobyc, Jul 15, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. scoobyc

    scoobyc Rookie

    Joined:
    Oct 30, 2007
    Messages:
    28
    Location:
    scotland
    Has anybody got the above fitted to a 360? I have a 360 coupe with a tubi (stage 2 i think) and love the noise but sometimes find it a bit loud around town (and worried local police might pull me over!) and wondered if anyone has used the standard tips with the tubi so that its quieter at low revs with the valves shut? thanks for any info, sc.
     
  2. C4YES

    C4YES Formula Junior

    Joined:
    Apr 7, 2008
    Messages:
    992
    Location:
    Orange County, CA
    Full Name:
    Todd
    If you do a search, you will find that you can use the stock end pipes to lesson the amount of resonance coming from your Tubi. This, of course, is assuming that you will not bypass the vacuum.
     
  3. scoobyc

    scoobyc Rookie

    Joined:
    Oct 30, 2007
    Messages:
    28
    Location:
    scotland
  4. Skidkid

    Skidkid F1 Veteran Owner Rossa Subscribed

    Joined:
    Aug 25, 2005
    Messages:
    9,523
    Location:
    Campbell, CA
    Full Name:
    John Zornes
    Definitely a straight on fit. My car was set up that way for a while before I went back to the Tubi tips. I have a Spider and in a city I would not go without the valves. The echo off the buildings is just too much for driving all of the time.
     
  5. scoobyc

    scoobyc Rookie

    Joined:
    Oct 30, 2007
    Messages:
    28
    Location:
    scotland
    perfect, thanks for the help :)
     

Share This Page