Tubi won't come out | FerrariChat
Buy

Tubi won't come out

Discussion in 'Technical Q&A' started by JIMBO, Jun 16, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JIMBO

    JIMBO Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,362
    Bradenton, Florida
    Full Name:
    Jim DeRespino
    #1 JIMBO, Jun 16, 2008
    I need to replace the seals in the clutch release bearing in my 512TR, but I can't get the Tubi exhaust out. I've taken it out before but I can't remember how. I'm pretty sure it comes out from the top. The cats and pre-cats are off as well as everything on the back of the bellhousing. Should I try removing the gear housing? This is really pissing me off. Any help would be appreciated.
     
  2. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,385
    Frederick, Maryland
    Full Name:
    Brian Brown
    #2 Motob, Jun 16, 2008
    It won't come out, because it comes out the bottom not the top. You have to remove the lower valence panel in order to remove it from the bottom.

    Brian Brown
     
  3. JIMBO

    JIMBO Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,362
    Bradenton, Florida
    Full Name:
    Jim DeRespino
    #3 JIMBO, Jun 16, 2008
    Thank you, Grasshopper, you are indeed wise. I kinda figured that out after too much head scratching. It is out and all is well. Now for the seals!
     

Share This Page