360 Tune by 360trev

Guys for the life of me I can’t figure out how to send a PM to Trev. It will probably be something embarrassingly easy but could someone please help a newbie out!! Thank you

 

Trev is the man. Nothing else compares!

 

Erik- Not enough posts to start a conversation.

 

Just uploaded by ECU's to Sam/Trev for their magic wand treatment. Great process they have going on with the way they are dumping and flashing the ECU's. I don't want to say anything about how they are doing it yet because I don't know if that is going to be the standard practice going forward but if so, it will be a game changer!

 

Just had my '00 360 gated car flashed by Peter and the boys at AI in Charlotte with Sam and Trev conducting online. Sam took the time to interview me beforehand to ensure the flash was exactly what I was looking for. Get ready for a grin you can't lose and watch the odometer spin up quickly b/c you will not want to stop driving! The torque pickup is amazing, to say the least, as well as throttle response and no more CELs for the CAT and header crowd. I could go on and on....By far the best performance increase for the buck I can think of. Bravo! Well done, sirs!

 

Do they do the 430 also, or must the 360?

 

There are posts by those who have had their 430s flashed by Trevor, all with rave reviews. I'm not sure about the current state of affairs, but if I were a bettin' man...

 

Just spoke with Peter at AI in Charlotte (getting new Tubi headers installed on my 360 ) and I can confirm that he just did a 360Trev flash on a 430 and the result was astonishing (that's my summary word for Peter's description). Hope that helps.

Cheers!

 

Yes they do 430s also. We were doing a 430 conversion to 6 speed and did the 430 ECU flash for a lot more than the conversion needs and the owner raves about the difference. That happened the day after Kens was completed. 430 drove for 250 miles on delivery day!

 

Thanks guys! Now doing all the Ferrari MED9 cars too and my work on the 458 to Speciale++ is already well loved.

I'm actually getting roped into ALL kinds of crazy lately (This was after a direct recommendation from Tavarish (McLaren P1 rebuild fame)...

Image Unavailable, Please Login

Answers on postcard if anyone knows what car this fits

 

I have Trev’s flash on my Scud. I’m a happy camper. I lost a bit of low end torque going to high flow cats and the tune fixed the issue. Driveability of car is great and from my butt Dyno the car pulls harder on the top end.

 

I am going to make a BOLD statement .... Anyone with a 360 or a 430 that does not have Trev's ECU custom tuning are driving cars that are literally partially disabled. With todays tire technology, THIS is the way these cars should have come from the factory, the difference is night and day.

Anyone that drives my car and then drives a stock 360 or even a 430 is utterly disappointed

Just an FYI... people in Canada that want to upgrade their ECU's please reach out to me, we now have a shop in Toronto that has 360Trev's programming

Cheers
Steve

 

Just ballpark, what does a tune typically run?

 

I believe in the neighbourhood of $2500 - $3,000
Cheers
Stee

 

Had my 430 done back in June. Love it!

 

If a car is tuned with stock cats and headers and those are modified, does it need to be retuned? If so, how is that handled?

 

Mine was tuned earlier this week and I had the same questions. I'm still stock but Kline cats and exhaust are on the way (2 months lead time), and it's tuned for that setup. I'll also be adding headers eventually. The answer I got was a retune would only be needed if the headers were radically redesigned.

 

Has anyone with an unmodified CS had the tune done and what was the result?
TIA

 

I believe only Trev would be able to answer this with any accuracy
Cheers
Steve

 

Anyone know if Trevor is able to tune the bigger 430 throttle bodys yet?

Sent from my SM-S918U using Tapatalk

 

You can PM for more information but yes. Significantly different!

 

Yes.

 

Wow thats awsome are we in the states still dealing with sam?

Sent from my SM-S918U using Tapatalk

 

@360trev or others: sorry for the newbie question, but say I convert a F430 to a 6-speed manual, install some aftermarket headers and want to get it all tuned right, how do I get this 360trev tune? Do I have to send my ECU somewhere or is there capability to do it remotely?

 

Remotely