Tweeter help!!! | FerrariChat
Buy

Tweeter help!!!

Discussion in '360/430' started by therealmerc, Dec 20, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. therealmerc

    therealmerc Rookie

    Apr 3, 2011
    46
    #1 therealmerc, Dec 20, 2014
    Last edited by a moderator: Sep 7, 2017
    Hello everyone I need you guys help. Can anyone identify this tweeter? I was upgrading my tweeter covers to carbon fiber and one of the tweeters fell accidentally and the dome cracked. I wanted to replace it with the same tweeter but I dont see ANY markings on the tweeter to identify who the manufacturer is. If noone can identify it, please recommend the BEST tweeter i can get. I have a 360 spider. Thanks in advance everyone!

    merc
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. F456 V12

    F456 V12 F1 Veteran
    Silver Subscribed

    Mar 13, 2004
    5,257
    Coto de Caza
    Full Name:
    Christian
    #2 F456 V12, Dec 21, 2014
    I used Focal, fit perfectly in the stock mounting.

    MB
     
  3. therealmerc

    therealmerc Rookie

    Apr 3, 2011
    46
    #3 therealmerc, Dec 21, 2014
    F456 V12,

    Thanks for your reply. Which model Focal tweeters did you use? How is the sound quality?
     
  4. F456 V12

    F456 V12 F1 Veteran
    Silver Subscribed

    Mar 13, 2004
    5,257
    Coto de Caza
    Full Name:
    Christian
    #4 F456 V12, Dec 22, 2014
    Last edited by a moderator: Sep 7, 2017
    I don't recall exactly, it was a few years back, but if you look at this link and look at the tweeter in the picture, it is the same diameter as the cut out of the OEM speaker holder...I just cut out the tabs inside that hold the OEM tweeter, put a little dap of silicon under the lip of the new tweeter and installed the new speaker. You will have to change the connection to the blade type, cutting off the Ferrari connections and crimping on new connectors. Looked OEM, picture of my car below.

    As a BTW, I only installed the speaker and did not install the cross overs and used the factory installed wiring harness. The mid range speakers are pretty much plug in the Ferrari cut outs, you might have to trim the sheet metal a bit. I also reused the OEM mesh grills and mounted them to the door panels to maintain the OEM look. Overall much better sounding and as a FYI my car had the Hi Power Audio option with the power amp and sub-woofer.


    Focal 165AS Access Series 6-3/4" 2-way component speaker system at Crutchfield.com


    MB
    Image Unavailable, Please Login
     

Share This Page