Tyre monitor sensors | FerrariChat

Tyre monitor sensors

Discussion in 'Technical Q&A' started by Jonny English, Jan 30, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jonny English

    Jonny English Formula Junior

    Jun 14, 2017
    416
    Poole, Dorset
    Full Name:
    Jon
    #1 Jonny English, Jan 30, 2021
    I want to put some wheels from my old 599 on my 488. I was wo during if the sensors will still work on a new generation
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,309
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Jan 30, 2021
    Look in the relevant sections but I think the hole pattern might be different
     
  3. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,054
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #3 tazandjan, Jan 30, 2021
    Same bolt pattern on 599 and 458 wheels. Not sure on the TPMS sensors. Both use 433 MHz sensors, but the 599 shows RDE001 and the 458 shows RDE011. Here are the 458 sensors for only ~$35 each. I think I would just buy a set of 458 sensors and know they were going to work. Should be somewhere similar in the UK now that you know what you need, HUF RDE011.

    Ferrari Huf IntelliSens TPMS Sensor 282189 433MHz
     
    Pedronz and Solid State like this.
  4. Pedronz

    Pedronz Rookie

    Jul 14, 2020
    42
    New Zealand
    Full Name:
    Peter C Andrew (Pedro)
    #4 Pedronz, Oct 25, 2021
    I tried whelks and sensors off 488, on my Portofino, not connecting so will buy aftermarket sensors
     

Share This Page