Undoing a 456GT door trim properly. | FerrariChat
Buy

Undoing a 456GT door trim properly.

Discussion in '456/550/575' started by PierreBogart, Nov 12, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PierreBogart

    PierreBogart Rookie

    Feb 7, 2007
    13
    #1 PierreBogart, Nov 12, 2008
    Hello guys. I wish to check my window lifting devices before going for the big job. Any chance for the right sequence for undoing the door trim properly without damage? Pictures or schematics are more than welcome. Many thanks.
     
  2. Arvin Grajau

    Arvin Grajau Seven Time F1 World Champ

    Jun 7, 2006
    78,324
    Wurundjeri man.
    Full Name:
    Arvin Grajau
    #2 Arvin Grajau, Nov 13, 2008
    any photos
     
  3. oss117

    oss117 F1 Rookie

    Jan 26, 2006
    4,185
    Plantation, Florida
    Full Name:
    Alfredo
    #3 oss117, Nov 13, 2008
    You have to start with the armrest.
    There are a couple of screws under it and from there it is pretty straight forward.
    I would caution though with messing around with the window lifting device: it is a pain in the butt to adjust it properly and you may end up with a window that does not seal properly or worse, with one that closes in too hard against its gasket.
     
  4. PierreBogart

    PierreBogart Rookie

    Feb 7, 2007
    13
    #4 PierreBogart, Nov 13, 2008
    Could you tell me from the armrest undone what I should do then? Anny hidden screws? Is the panel held by press-on pins? Does it come in several pieces? In what order? Many thanks.
     

Share This Page