Upholstery Kit Lancia Scorpion Montecarlo | FerrariChat
Buy

Upholstery Kit Lancia Scorpion Montecarlo

Discussion in 'Other Italian' started by upnatum, Sep 28, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. upnatum

    upnatum Rookie

    Mar 11, 2008
    31
    Rhode Island
    Full Name:
    Carl Helmetag
    #1 upnatum, Sep 28, 2008
    Hi all,

    I have a '76 Lancia with a ratty driver's seat. Does anyone know if there is a leather re-upholstery kit for these or do I have to go from scratch? Color is a red.
     
  2. julian_blk348

    julian_blk348 Karting

    Nov 21, 2003
    112
    Austin TX
    Full Name:
    Julian
    #2 julian_blk348, Sep 29, 2008
    I have a '76 scorpion also and don't ever recall seeing at kit. I know it's not cheap but your best bet might be to have a shop recover it. And while they're at it, they could also add more padding to your liking.
     
  3. upnatum

    upnatum Rookie

    Mar 11, 2008
    31
    Rhode Island
    Full Name:
    Carl Helmetag
    #3 upnatum, Sep 30, 2008
    That's what I thought but figured I send out the idea. Also looking for a little bit more aggressive cam as I'm converting to dual Webers. Any thoughts on that?
     
  4. upnatum

    upnatum Rookie

    Mar 11, 2008
    31
    Rhode Island
    Full Name:
    Carl Helmetag
    #4 upnatum, Sep 30, 2008
    PS-Your car is sweet.
     
  5. ProRallyCodriver

    ProRallyCodriver Formula 3

    Oct 25, 2005
    1,250
    Alexandria, VA
    Full Name:
    Dave Shindle
    #5 ProRallyCodriver, Oct 1, 2008
    No one sells it.

    I don't like the stock seats much and went aftermarket w/ most my Scorpions. The stock seat is heavy and the adjuster rods commonly break.

    Pics of my Scorpions here:

    http://www.cardomain.com/ride/803556
     
  6. upnatum

    upnatum Rookie

    Mar 11, 2008
    31
    Rhode Island
    Full Name:
    Carl Helmetag
    #6 upnatum, Oct 1, 2008
    Where did you find your cam? I'm putting on dual Webers and need a hotter intake cam than stock.
     
  7. ProRallyCodriver

    ProRallyCodriver Formula 3

    Oct 25, 2005
    1,250
    Alexandria, VA
    Full Name:
    Dave Shindle
    #7 ProRallyCodriver, Oct 2, 2008
    I got mine many years ago from another owner who was selling his.
    If you can't find Scorpion specific ones, you can get Fiat ones but would have to swap over Fiat cam boxes also or change the distributor gear if top mounted or install a cam-end distributor.

    Side-draft or down-draft? What are you doing for exhaust? You can't bolt on a performance top-end and expect all the potential horsepower w/o swapping in higher compression pistons first.

    I've got a shop here near DC if you're not a do-it-yourselfer.
     

Share This Page