Question for the brother hood Looking for the vacuum line connections which operate the fuel pressure regulators need the full pathway of this system from the vacuum tank and all connections this picture shows part of it but does not show connections from solenoids to steel pipe etc Image Unavailable, Please Login
Some of the plumbing is shown in the Secondary Air Injection System diagrams. Sorry, a bit blurry. Image Unavailable, Please Login
Hi Ian thanks I saw that Found out the problem though and not looking close enough to lines. The one line from the bank 1 was disconnected and not reconnected. This was why it seemed different. Lots of wires below that area and I have never had the heads off till now and I did not reconnect once the carbs went on. thanks all good. Found another vacuum line back right side I missed as well it connects to the secondary air pipe. all good now
