Anybody hardwired a V1 in their 355 If so where did you run the wires to and what wire did you clamp into for the power. Thanks Chas
I did, I used one of those piggyback fuses instead of splicing into a wire, forget which fuse, but its hot with ign. on. You can test with a test light. Wires go up inside right A pillar, then under headliner molding to just above mirror. I tywraped the wire to the mirror arm.
Not driver's side, the right side because its closer to the fuse box. You can fish the wire from the fuse box up under the carpet to above the dash, then pull off the A pillar molding and continue fishing the wire up to the headliner molding. I did the remote from Valentine, the V1 is behind the mirror, you can't see it from the drivers seat. Remote is on top of the steering wheel housing.
