Vents in under tray for the clutch vents | FerrariChat

Vents in under tray for the clutch vents

Discussion in '360/430' started by gphodge, Jul 7, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gphodge

    gphodge Karting Silver Subscribed

    Joined:
    Jun 15, 2010
    Messages:
    176
    Location:
    Arizona
    Has anyone drilled some small vent holes in the undertray where the transmission vent is to remove some heat from the clutch to see if it last longer, I was thinking about this while it was is off. I was looking at the under tray while it is off doing some other major service belts and such, valve cover gaskets and camshaft seals, and exhaust and the vents from the tranny rest right on it, hence why the holes in it if it is closed off by the tray.

    By the way the valve cover gaskets replacement is a pain in the you know what, but it's better than the alternative paying the dealer multi thousands, nothing against them they do fine work but I have been working on my own vehicles for many years.
     
  2. mrpcar

    mrpcar Formula 3

    Joined:
    May 27, 2007
    Messages:
    1,114
    Location:
    Chino hills, CA
    Full Name:
    Robin
    I had posted a question couple weeks ago regarding adding more NACA ducts to the undertray of the 360 for additional cooling purpose.

    http://ferrarichat.com/forum/showthread.php?t=289149
     

Share This Page