VITALONI STALK (a/b/c) | FerrariChat

VITALONI STALK (a/b/c)

Discussion in '206/246' started by DINO 34, Apr 17, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. DINO 34

    DINO 34 Rookie

    Mar 30, 2011
    17
    FRANCE
    Full Name:
    Patrick
    Patrick Charron
    Dino 246 # 2680
    Hello, Bonjour,
    I have troubles with my stalks because the contacts inside the plate are worn out (troubles with light and wiper command).
    So I'am looking for a new Vitaloni Stack (a/b/c) set
    If anyone has a spare one to sell or knows a place where I can find one let me know.
    Thanks for your help
    Photos of the 2 models
    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    Don't need a new one. Have this one rebuilt by "Unobtainium".
     
    absostone likes this.
  3. mar3kl

    mar3kl Formula Junior

    Nov 17, 2011
    470
    Silicon Valley
    Full Name:
    Mark
    Or by O.D.D. Parts in Sonoma CA, USA. Much better to try keep your current setup.
     
    swift53 likes this.
  4. DINO 34

    DINO 34 Rookie

    Mar 30, 2011
    17
    FRANCE
    Full Name:
    Patrick
    Thanks for your advice
    In fact my stalks are OK My problem are the electrical contacts inside the circle. Do you know if they can fix it also ?
     
  5. mar3kl

    mar3kl Formula Junior

    Nov 17, 2011
    470
    Silicon Valley
    Full Name:
    Mark
    O.D.D. Parts can make any sort of repairs you need. They did a very nice job on mine a few years back, very happy with the results.
     
  6. DINO 34

    DINO 34 Rookie

    Mar 30, 2011
    17
    FRANCE
    Full Name:
    Patrick
    Thank you Mark for your reply
    I'm a little afraid to send my parts from France to US and back.
     
  7. npwmd2

    npwmd2 Formula Junior

    Mar 31, 2015
    254
    Hudson Valley
    Full Name:
    Neal
    Shipping to the USA is generally no problem. You can get "Ferrari" the shipper to handle the shipment. This is the shipper, not the car company. First call and make sure the company can do what you want. Then contact "Ferrari " and they will handle everything else. Good Luck.
     
  8. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    This is the easy part, simply a copper plate and large 'U' copper spanner but high heat can cause the shape to warped.
    Easy to see and you must have the 38mm Ring Nut tool to disassemble and ship to somebody else professiional, so why do not you try/
    Clean up all the copper contact, check inspect for stalk action and confirm all soldered points not cracked. if you must idsassemble the plug please have recorded a system so all pins returns correct and yo take many photos before
     
  9. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares
    I bet high currnet has warped the copper, perhaps high beams ON for extra time period - add the new relay to prevent the high current, only 0.2amp relay trigger is side. Normal all the current will go through stalks, can cause big heat. We use to cut the H4 side safety tab so it would fit in EU H3 bulb to make 100W high beam. This would oveheat many Vitaloni so we learn to add the relay. Imagine you are fast in the dark and lghts off! Very excited
     
  10. DINO 34

    DINO 34 Rookie

    Mar 30, 2011
    17
    FRANCE
    Full Name:
    Patrick
    Thank you guys for your post and advice, I will try to choose the good option.
     
  11. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,288
    E.S.
    Full Name:
    Alberto
    What are you afraid of? We all send and receive parts from EU. Just send it express with a reputable outfit.

    Regards, Alberto
     

Share This Page