Wanted: center lug nut socket and quick wand F430C | FerrariChat

Wanted: center lug nut socket and quick wand F430C

Discussion in 'Ad Archives' started by Teachdocs, Jan 29, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Teachdocs

    Teachdocs Formula Junior

    Sep 3, 2012
    567
    Kansas City area
    Full Name:
    Chad
    #1 Teachdocs, Jan 29, 2014
    Wanted for a F430 Challenge car: prefer used but new source OK.

    Socket for center lug nut
    Wheel gun
    600NM torque wrench

    Air jack Quick Wand
    Nitrogen HP hoses, regulator, valve setup to run the air jack and wheel gun.
    I can source a 30 gal tank and dolly locally unless someone has a complete used setup they want to sell.

    Thanks!
     
  2. Sicilian1

    Sicilian1 Karting

    Oct 7, 2013
    85
    Bethesda,MD
    #2 Sicilian1, Jan 29, 2014
    I have just completed this task for a F430C that I recently puchased.

    IR lightening drive 1" impact gun. Only source is HurdPitTools.com. Also bought high pressure hose, connection, whip hose and regulator from him. Joe or Jim are the contacts

    Air wand (ferrari part 95973849)
    Jack supports (95978262)
    Center lock will socket
    Bought above items from Andrea at Capristo Exhaust
    Found a cheaper genesis wand at Pegusus racing but was not sure who made the air jack system for the challenge car

    Need a long torque wrench with 1"drive.
    Proto 6022b or Snap on L872

    Fuel jug (RE-169) and 2 1/4 dry break (RE-105) from Ultrarev.com in NJ.

    Working on nitrogen tanks now. Debating what size to get.
     
  3. crashklein

    crashklein Rookie

    Apr 26, 2017
    3
    Easton CT
    Full Name:
    Steve
    #3 crashklein, Nov 1, 2017
    I use an 80 Gallon Nitrogen tank for my Saleen S7R. It is filled up with 3000lbs then uses 250 lbs every time I jack up the car. 3000/250 = 12 times. I am about to buy an F430 Challenge that is missing a few things:
    I will need:
    Air Jack Wand
    Wheel removal tool
    extra Wheel nuts
    Factory Racing seats
    If anyone has anything laying around please let me know.
    Thanks
     
  4. rlips

    rlips Formula Junior

    Jul 29, 2011
    959
    New Jersey, USA
    #4 rlips, Nov 2, 2017
    tooltopia for precision instruments 600 ft lb torquewrench...3/4 drive so get a 3/4 to 1" adapter.
    Airgas for nitrogen.
    Tooltopiafor Ingersoll rand 1" impact gun.

    Just got 458 C, no problems with that set up.
     

Share This Page