water pump 250 | FerrariChat

water pump 250

Discussion in 'Vintage (thru 365 GTC4)' started by arnup, Jun 7, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. arnup

    arnup Rookie

    Mar 31, 2005
    24
    sydney
    Full Name:
    kevin
    Has anyone had problems with water pump seals leaking?
     
  2. ferrarifixer

    ferrarifixer F1 Veteran
    BANNED

    Jul 22, 2003
    8,520
    Melbourne
    Full Name:
    Phil Hughes
    Sorry kevin, couldn't resist, But.....

    No, in nearly 50 years since production, not one has ever leaked.

    !!

    What kind of question is that??

    To try to help you, there has been a few improvements in seal design and manufacture, but they don't last forever.
     
  3. shaughnessy

    shaughnessy Formula 3
    Rossa Subscribed

    Apr 1, 2004
    1,869
    Wolfeboro NH
    Full Name:
    Thomas E Shaughnessy
    common problem currently, some seals the vendors sell do not work, unsure which vendors. Springs too can be too weak (that are being distributed in the kits)
     
  4. dfab

    dfab Rookie

    Mar 30, 2004
    1
    Full Name:
    David Fabiszak
    I changed mine last year. It had a strange behavior since I bought the car. It would drip a little in the garage after I ran the car for a short time, but not if I ran it for more than a few miles. Eventually it started dripping all the time and I took it apart.

    I got the new seal from Partsource. The spring tension was about the same as the one I removed. It seemed like a nice qulality part. Hasn't been a problem since I changed it.

    Here's a useful link if you are going to do it yourself. http://www.parrotbyte.com/kbc/ferrari/WaterPumpRebuild.htm You need to hone down the sealing surface that goes on the impeller and I did mine exactly this way. Thanks to Kerry for writing it up.


    Dave Fabiszak
     
  5. gva

    gva Rookie

    Jul 16, 2004
    37
    Melbourne Australia
    Full Name:
    Graeme Vincent
    It is a common problem. PM me and I will forward details.
     
  6. arnup

    arnup Rookie

    Mar 31, 2005
    24
    sydney
    Full Name:
    kevin
    Sorry Phillip, couldn't resist, but ..... In less than 50 years production not one has EVER leaked! You have no idea!
    It appears you are wrong, again!
    Please don't try and help me, unless you know what you are talking about.
     
  7. arnup

    arnup Rookie

    Mar 31, 2005
    24
    sydney
    Full Name:
    kevin
    Thank you, Shaughnessy, dfab and gva. I will be in contact
     
  8. jimmyr

    jimmyr Formula Junior

    Oct 10, 2004
    342
    Scottsdale, AZ
    Full Name:
    Jim
    One quick tip on these seals during their replacement: do not touch the surface of the carbon seal during installation as the oil from your skin could prevent the surfaces from lapping together and a small drip could develop. Jim Riff
     
  9. 330gt

    330gt Formula 3

    Nov 12, 2004
    2,096
    Seattle, WA
    Full Name:
    Kerry Chesbro
    As dfab mentioned, I replaced the seal in my 330 last year. I bought my seal from Dennis McCann and it hasn't leaked a drop since. Have about 3k miles on it now.

    Regards, Kerry

    PS, David, I'm glad someone gets useful information from my Ferrari online musings.
     

Share This Page