Water Pump tensioner pulley removal | FerrariChat
Buy

Water Pump tensioner pulley removal

Discussion in '456/550/575' started by Toddrab13, Aug 30, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Toddrab13

    Toddrab13 Karting

    Jul 10, 2011
    56
    Michigan
    Full Name:
    Todd
    #1 Toddrab13, Aug 30, 2018
    I have used the search function to no avail... I am changing the accessory belts and tensioner bearings and haven't been unable to remove the tensioner pulley. It's loose but doesn't want to come off. I am always leary of using force just in case I am missing something. I looked through the WSM for the 575 and couldn't find anything...

    -Todd
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,583
    San Carlos, CA
    Full Name:
    Mitchell Le
    #2 yelcab, Aug 30, 2018
    can you post picture?
     
  3. Toddrab13

    Toddrab13 Karting

    Jul 10, 2011
    56
    Michigan
    Full Name:
    Todd
    #3 Toddrab13, Aug 30, 2018
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,583
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, Aug 30, 2018
    you need a puller to get the pulley off from that arm, and then you press the bearing out. Unless you can fit a small puller to the front of the pulley, it looks like you need to remove the whole arm from the car to use the puller on it.
     
  5. Toddrab13

    Toddrab13 Karting

    Jul 10, 2011
    56
    Michigan
    Full Name:
    Todd
    #5 Toddrab13, Aug 30, 2018
    Thanks Mitchell! Pulley came right off. Bearing seemed OK but figured I'd change it while I was there.
     

Share This Page