What car do these trunk lid struts go to? | FerrariChat

What car do these trunk lid struts go to?

Discussion in '308/328' started by Bloated Monkey, Mar 8, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bloated Monkey

    Bloated Monkey Rookie

    Joined:
    Jan 3, 2009
    Messages:
    11
    Location:
    Houston, TX
    Full Name:
    Tim
    I bought a couple of 308 engine hatch struts off Ebay. They were intended for my '81 308gtsi, which was missing them, but when I got them, they appear to be about half as long as they need to be. The ones I received are 10-1/2" long fully extended and have the following written on them: Ferrari Made in West Germany 290319 0250N 22/89 E 09 605.595.00. Any idea what car they go to? Thanks.
     
    Bloated Monkey, Mar 8, 2009
    #1
  2. Pantera1523

    Pantera1523 Formula Junior

    Joined:
    Mar 17, 2004
    Messages:
    432
    Location:
    Virginia
    Full Name:
    Scott Carpenter
    Last edited: Mar 8, 2009
    Pantera1523, Mar 8, 2009
    #2
  3. Bloated Monkey

    Bloated Monkey Rookie

    Joined:
    Jan 3, 2009
    Messages:
    11
    Location:
    Houston, TX
    Full Name:
    Tim
    So do some 308's have dual pressurized struts on the front bonnet? Mine has an unpressurized pole with a button to release it, which is consistent with what's shown in the manual.
     
    Bloated Monkey, Mar 8, 2009
    #3
  4. 4redude

    4redude Formula Junior

    Joined:
    Jan 13, 2005
    Messages:
    732
    Location:
    Fungus Corner
    Full Name:
    Brian Keegan
    The original equipment Ferrari struts have the Ferrari part number printed on them.
    The last group of numbers 60559500 is the part number for front bonnet struts for all Mondial's.
     
    4redude, Mar 8, 2009
    #4

Share This Page