What diameter back wheels for 360? | FerrariChat
Buy

What diameter back wheels for 360?

Discussion in '360/430' started by plstc, Dec 16, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. plstc

    plstc Karting

    Nov 12, 2005
    54
    #1 plstc, Dec 16, 2005
    I appreciate the input about wheels for my 360; all very helpful. I decided to order HRE841 brushed center with polished lips; 19" front, 20" back. I was told to order 11" diameter backs, wouldn't the car look better with 12"? What are the pros and cons? Sorry if this is a stupid question
     
  2. TopElement

    TopElement Formula 3

    May 14, 2005
    1,540
    OC & Vegas
    Full Name:
    A Montoya
    #2 TopElement, Dec 16, 2005
    If you ordered 20" for the rear, then that's the diameter. 11" is a good width to go with though.
     
  3. plstc

    plstc Karting

    Nov 12, 2005
    54
    #3 plstc, Dec 16, 2005
    You'd think since I peel people's face back for a living I would be able to figure this **** out. Sorry for the mistake. Is there a downside of 12" on the back?
     
  4. TopElement

    TopElement Formula 3

    May 14, 2005
    1,540
    OC & Vegas
    Full Name:
    A Montoya
    #4 TopElement, Dec 16, 2005
    I know that some people have gone wider than 11" in the rear, up to 13" i believe to fit 355's. However, the offset of the wheel has to be chosen VERY carefully to avoid rubbing issues.
     

Share This Page