What to use for a ground cable 348 TS | FerrariChat
Buy

What to use for a ground cable 348 TS

Discussion in '348/355' started by Mera, Mar 20, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mera

    Mera Formula Junior

    Aug 13, 2005
    768
    Milwaukee, WI
    Full Name:
    Rodney Dickman
    #1 Mera, Mar 20, 2008
    I have heard you should get rid of the factory quick disconnect ground cable. I can do that. Is there a ground cable available that works well as a replacement? My battery is in the back.

    Rodney 1990 348 TS
     
  2. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #2 Miltonian, Mar 20, 2008
    You can purchase made-up battery cables in popular lengths at most auto parts stores. Just tell them how long your old cable is, and buy one that isn't too short. There should be a cable from the battery to the frame, and from the frame to the engine/transmission.

    Or, if your cable is in good condition but you simply want to remove the quick-disconnect fitting, you can purchase a splice and have it staked on, and cover the splice with a good heat-shrink covering.
     
  3. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,224
    Mount Isa, Australia
    Full Name:
    Pap
    #3 PAP 348, Mar 20, 2008

    Thats what I would go with. :):)
     

Share This Page