430 Wheel alignment for track

Is your car lowered at all? You can get additional camber if the car is lowered. A friend got close to -2.5 deg on 430 by removing the shims on the upper control arms and shimming the lower control arms. But his car is lowered a bit.

 

Hmmmmm, I was wondering if the Scud has different geo to allow for more camber easily. I also have a 2005.

I just got the car aligned with shims and achieved 2.4 degrees in the rear, but the fronts are only at about 1.7 degrees. I’d like to run between 2.5 and 3 degrees front and 2 - 2.5 degrees rear. I am trying to figure out the easiest way to get there…perhaps the challenge LCA rod? Does anyone have a part number?

 

I don’t have the part number, but you can find the parts on euro spares.

 

Found it, but are we 100% that the challenge threaded rod:
A) is longer than standard F430
B) will fit on standard F430 chassis